Devices of the closed cycle

Аппараты с оборотом дроби предназначены для дробеструйной обработки, в процессе которой использованная дробь собирается, очищается и возвращается в систему для повторного использования.

PR 50

Capacity	2 – 4	m²/h
Length	570	mm
Width	500	mm
Height	1.350	mm
Weight	33	kg
Abrasive load	60	l
Air line pressure	6-10	bar
Air consumption	400 - 1.000	l/min
Electric power consumption	1,08 kW, 230 V	V
Abrasive hose length	3	m

Closed-cycle sandblasting injection machine PR 50 is used for treatment of small surfaces. The abrasive material moves in a closed cycle without any scattering and making almost no dust. The sandblasting nozzle is fitted with a brush that is pressed against the cleaned surface. The machine is suitable for removal of rust, cleaning of welds, external and internal angles of the parts. It may also be used in application of letters and images on non-metallic (granite, marble, ceramic tile, etc.) surfaces.

DINO Junior II

Capacity	2,5 – 5	m²/h
Length	2.000	mm
Width	700	mm
Height	1.800	mm
Weight	240	kg
Abrasive load	60	l
Air line pressure	5-8	bar
Air consumption	from 2.500	l/min
Electric power consumption	5 kW, 400	V
Abrasive hose length	5	m

Pressure recycling sandblasting machine DINO Junior II used for sandblast cleaning of small surfaces where the abrasive material moves in a closed cycle. The sandblasting nozzle is fitted with a brush that is pressed against the cleaned surface, keeping the shot from scattering and there is almost no dust at all. The machine is helpful in removing rust, cleaning of welds and treatment of internal and external angles of the parts.

DINO Master

Capacity	3,5 – 8	m²/h
Length	2.400	mm
Width	1.400	mm
Height	1.800	mm
Weight	400	kg
Abrasive load	100	l
Air line pressure	5-8	bar
Air consumption	from 2.500	l/min
Electric power consumption	2 x 5,5 kW, 400	V
Abrasive hose length	10	m

Pressure recycling sandblasting machine DINO Master used for sandblast cleaning of small surfaces where the abrasive material moves in a closed cycle. The sandblasting nozzle is fitted with a brush that is pressed against the cleaned surface, keeping the shot from scattering and there is almost no dust at all. The machine is helpful in removing rust, cleaning of welds and treatment of internal and external angles of the parts.

ARS 200

Capacity	20	m²/h
Length	1.400	mm
Width	1.700	mm
Height	2.500	mm
Weight	350	kg
Abrasive load	200	l
Air line pressure	6-10	bar
Air consumption	from 4.500	l/min
Electric power consumption	5,5 kW, 400	V
Abrasive hose length	10	m

Abrasive recycling machine ARS 200 comprises of the package equipment that secures recycling and further use of the abrasive grit. Contact-free surface treatment occurs in a closed cabin fitted with air filters. After the treatment, the recycling unit collects the used grit and supplies it to the header unit for further operation. The machine is suitable for every type of sandblasting, including treatment of big surfaces with every kind of existing abrasive grits.

DINO Junior I

Capacity	1,5 – 4	m²/h
Length	2.000	mm
Width	700	mm
Height	1.800	mm
Weight	240	kg
Abrasive load	25	l
Air line pressure	3-5	bar
Air consumption	from 1.500	l/min
Electric power consumption	3 x 1,08 kW, 230	V
Abrasive hose length	5	m

Pressure recycling sandblasting machine DINO Junior I used for sandblast cleaning of small surfaces where the abrasive material moves in a closed cycle. The sandblasting nozzle is fitted with a brush that is pressed against the cleaned surface, keeping the shot from scattering and there is almost no dust at all. The machine is helpful in removing rust, cleaning of welds and treatment of internal and external angles of the parts.