Sandblasting devices
Sandblasting devices clean the surface, blowing a stream of fine dry abrasive substance (cast iron cuts, steel shot, corundum pellets, glass powder, slag, sand, etc.), generated by compressed air in the header tank. These high performance devices are operationally reliable, easy to maintain and are suitable for virtually every surface that needs to be blasted.
Mammut 60
| Capacity | 30 | m²/h |
| Pressure | up to 12 | bar |
| Size of abrasive | from 0.2 | mm |
| Amount of abrasive | 60 | l |
| Header tank diameter | 410 | mm |
| Height | 1.033 | mm |
| Weight | 70 | kg |
| Piping | 1 | " |
Sandblasting device serves to clean the surface of steel parts by blowing a stream of fine abrasive particles, to remove corrosion, slag, overlapping seams, oxide film, to treat welding seams, smoothing out the uneven surfaces, removal of burrs, matting and treating surface to required degree of roughness.
Basic package of equipment includes:
- header tank c/w piping and wheeled chassis,
- input valve,
- output valve,
- sound damper,
- remote control of the pressure relief system,
- a package of make-and-break joints,
- abrasive volume regulator,
- pressure control valve,
- package of hoses c/w fittings and nozzle plate,
- hard-alloy nozzle.
At the request of the Customer, the sandblasting device may be additionally fitted with:
- oil separator,
- pneumatic reducing gearbox,
- sieve,
- cover,
- borocarbon nozzle.
Mammut 100
| Capacity | 30 | m²/h |
| Pressure | up to 12 | bar |
| Size of abrasive | from 0.2 | mm |
| Amount of abrasive | 100 | l |
| Header tank diameter | 510 | mm |
| Height | 1.095 | mm |
| Weight | 85 | kg |
| Piping | 1 | " |
Sandblasting device serves to clean the surface of steel parts by blowing a stream of fine abrasive particles, to remove corrosion, slag, overlapping seams, oxide film, to treat welding seams, smoothing out the uneven surfaces, removal of burrs, matting and treating surface to required degree of roughness.
Basic package of equipment includes:
- header tank c/w piping and wheeled chassis,
- input valve,
- output valve,
- sound damper,
- remote control of the pressure relief system,
- a package of make-and-break joints,
- abrasive volume regulator,
- pressure control valve,
- package of hoses c/w fittings and nozzle plate,
- hard-alloy nozzle.
At the request of the Customer, the sandblasting device may be additionally fitted with:
- oil separator,
- pneumatic reducing gearbox,
- sieve,
- cover,
- borocarbon nozzle.
Mammut 200
| Capacity | 30 | m²/h |
| Pressure | up to 12 | bar |
| Size of abrasive | from 0.2 | mm |
| Amount of abrasive | 200 | l |
| Header tank diameter | 610 | mm |
| Height | 1.360 | mm |
| Weight | 170 | kg |
| Piping | 1¼ | " |
Sandblasting device serves to clean the surface of steel parts by blowing a stream of fine abrasive particles, to remove corrosion, slag, overlapping seams, oxide film, to treat welding seams, smoothing out the uneven surfaces, removal of burrs, matting and treating surface to required degree of roughness.
Basic package of equipment includes:
- header tank c/w piping and wheeled chassis,
- input valve,
- output valve,
- sound damper,
- remote control of the pressure relief system,
- a package of make-and-break joints,
- abrasive volume regulator,
- pressure control valve,
- package of hoses c/w fittings and nozzle plate,
- hard-alloy nozzle.
At the request of the Customer, the sandblasting device may be additionally fitted with:
- oil separator,
- pneumatic reducing gearbox,
- sieve,
- cover,
- borocarbon nozzle.
Premium 25
| Capacity | 25 | m²/h |
| Pressure | up to 8 | bar |
| Size of abrasive | from 0.2 | mm |
| Amount of abrasive | 25 | l |
| Header tank diameter | 260 | mm |
| Height | 820 | mm |
| Weight | 45 | kg |
| Piping | 1/2 | " |
Soft impact sandblasting device serves for treatment of steel parts surface, as well as for cleaning of concrete and brick facades of buildings (removal of graffiti, oil and spray paintings),renovation of monuments and historic buildings (removal of grime, patina and other such buildup accumulated over the time), treatment of wooden and stone structures (removal of mold and soot), renovation of interior walls and plasterwork (removal of whitewash, alfresco layers, residue of finishing materials), etc. Water supplied to and sprayed within the treatment area considerably reduces the dust content in the air..
Basic package of equipment includes:
- header tank c/w piping and wheeled chassis,
- spray control box,
- oil separator,
- remote control of the abrasive supply system,
- abrasive volume regulator,
- pressure control valve c/w manometer,
- package of hoses c/w fittings and nozzle plate,
- sandblasting assembly fitted with borocarbon nozzle Vario, 15° stream swirl nozzle and water supply regulator.
At the request of the Customer, the sandblasting device may be additionally fitted with:
- uniform abrasive feeder c/w pressure valve
- pneumatic reducing gearbox,
- cover,
- sieve,
- flat or conical borocarbon nozzle
Premium 60
| Capacity | 60 | m²/h |
| Pressure | up to 12 | bar |
| Size of abrasive | from 0.2 | mm |
| Amount of abrasive | 60 | l |
| Header tank diameter | 400 | mm |
| Height | 1000 | mm |
| Weight | 85 | kg |
| Piping | 1 | " |
Soft impact sandblasting device serves for treatment of steel parts surface, as well as for cleaning of concrete and brick facades of buildings (removal of graffiti, oil and spray paintings),renovation of monuments and historic buildings (removal of grime, patina and other such buildup accumulated over the time), treatment of wooden and stone structures (removal of mold and soot), renovation of interior walls and plasterwork (removal of whitewash, alfresco layers, residue of finishing materials), etc. Water supplied to and sprayed within the treatment area considerably reduces the dust content in the air.
Basic package of equipment includes:
- header tank c/w piping and wheeled chassis,
- spray control box,
- oil separator,
- remote control of the abrasive supply system,
- abrasive volume regulator,
- pressure control valve c/w manometer,
- package of hoses c/w fittings and nozzle plate,
- sandblasting assembly fitted with borocarbon nozzle Vario, 15° stream swirl nozzle and water supply regulator.
At the request of the Customer, the sandblasting device may be additionally fitted with:
- uniform abrasive feeder c/w pressure valve pneumatic reducing gearbox,
- cover,
- sieve,
- flat or conical borocarbon nozzle